Plastic Angle Trims

Show prices with VAT

Plastic Angle Trims provide a simple and effective solution for protecting, covering and finishing 90 degree corners. Widely used in construction, shopfitting, signage, fabrication and DIY projects, these versatile PVC profiles help create a neat, professional finish while protecting vulnerable edges from knocks and wear.

Off The Shelf
100mm Plastic Angle
From: £40.80
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
12.5mm Heavy Duty Plastic Angle
From: £53.90
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
12.5mm Plastic Angle
From: £10.00
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
15 x 10mm Plastic Angle
From: £30.60
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
15mm Plastic Flexi Angle
From: £39.30
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
16mm Plastic Angle
From: £12.00
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
18mm Plastic External Angle
From: £34.10
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
19mm Plastic Angle
From: £12.40
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
23mm Plastic External Angle
From: £53.00
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
25 x 12mm Plastic Angle
From: £40.20
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
25mm Heavy Duty Plastic Angle
From: £108.50
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
25mm Plastic Angle
From: £17.60
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
25mm Plastic Flexi Angle
From: £56.20
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
32mm Plastic Angle
From: £22.30
Select options This product has multiple variants. The options may be chosen on the product page
Off The Shelf
35mm Plastic Flexi Angle
From: £78.80
Select options This product has multiple variants. The options may be chosen on the product page

About Our Plastic Angle Trim

Equal Plastic Angles feature legs of the same length and a square 90 degree corner, making them ideal for corner protection, edging and finishing applications. Dimensions are based on the internal measurements of the angle to ensure compatibility with common board, panel and timber sizes.

For applications where space is limited or unequal leg lengths are required, Unequal Plastic Angles provide a practical alternative. These profiles are particularly useful for discreet edge capping, corner protection and installations where one face needs to remain less visible than the other.

Where greater impact resistance is required, Heavy Duty Plastic Angles offer enhanced protection with a rounded external corner and thicker construction. Commonly used in schools, healthcare environments, care homes, lift lobbies and other high-traffic areas, these profiles provide a more durable and safety-conscious alternative to standard angle trims while maintaining a clean, professional appearance.

Can't find what you are looking for?

Our sales team can help you find the right profile, or talk to you about a bespoke extrusion made to your own specification. You can also send us an enquiry online.

+44(0)1473 251051 sales@tubeway.co.uk

Frequently Asked Questions

These FAQs will be category based. These FAQs cover key information on our extrusion ranges, bespoke manufacturing, lead times, and technical support.

What are the most popular plastic angle trim colours?

White & Black plastic angle are by far the most popular colours for plastic angle trim across our range of plastic pvc angles, ranging in size from 6mm angle to 100mm plastic angle.

White plastic angle trim is a great all rounder, suitable for white walls, used as show gap filler around PVC windows and extensively in retail settings. Our brilliant white plastic angle has a satin finish.

Black plastic angle trim is also extremely well used, with its solid colour, even when scratched, our black plastic angle holds up to a variety of installations.

Anthracite Grey plastic angle is becoming increasingly popular and is available in popular 25mm and 38mm angle sizes. Anthracite grey angle trim is colour matched to RAL 7016.

If you’re looking for a Mid Grey Plastic angle, we also stock 19 & 25mm PVC angle trim in Grey RAL 7037.

What is a plastic angle trim used for?

Plastic angle trims can offer an aesthetic benefit over other types of corner protection such as aluminium angles as they can blend into the colour scheme of the setting. Plastic angle also has a slightly softer, less industrial look which makes them ideal for use in hospitals, care homes and hotels.

Our stock of plastic angle trim also enables you to choose from a selection of 12 different Coloured Plastic Equal Angles. All of our Coloured PVC Angle Trims are manufactured using RAL approved colour matches, check out the RAL references for each colour here. If you have a specific branding requirement using a RAL colour not available, call the Sales team today on 0143 251051.

Can your plastic angle trims be used in external applications?

All of our plastic angle trims (except Clear and Silver) are manufactured using External grade, UV stable PVC. As opposed to many of the cheaper alternatives on popular sales platforms you have full confidence that plastic angle trims supplied form Tubeway are suitable for use in both indoor and outdoor settings.

Whilst clear and silver can clearly still be used externally, over time you will find that clear in particular will de-colour and likely become yellow in appearance, it will also become slightly brittle. The period over which this happens is difficult to quantify as each install varies with conditions such as light and heat exposure and wind and rain etc.

What lengths of plastic angle trim do you stock?

We stock packs of 1m, 2.44m (8ft) or 3m (10ft) as standard, our 1m Plastic Angle offers a perfect length for Corner Protection for small scale DIY projects or corner protection from bumps at low height or restricted lengths.

The longer 2.44 or 3m PVC Angle lengths are better suited for standard board lengths or where looking to minimise the number of joints along a stretch.

PVC can be easily cut where bespoke lengths of angle trim are required using a fine tooth jigsaw or hacksaw. If you don’t have the ability to trim your plastic angle onsite or would like to save the time and effort in doing so, this is a service we are happy to provide for a small fee.

What fixing method should be used for plastic angle trims?

The method of fixing plastic angle trim can vary depending on how and where the plastic angle is being used. In commercial and industrial settings where the angle trims are being used for corner protection from heavy impact such as post trolleys or sack barrows, a mechanical fix where the plastic angle trim is drilled and screwed is likely to be best.

Where aesthetics are more important plastic pvc angles can be fitted using Self Adhesive Tape, which we can also supply. We have extensively tested the full range of Self Adhesive Tape we have on offer using a variety of fixing surfaces.

Why use PVC (Polyvinyl Chloride) plastic angle trim?

We manufacture in PVC (Polyvinyl Chloride) because we believe it offers the best all round performance of the plastic polymers available for plastic extrusion. When used in isolation (no tape or adhesive) PVC can also be extensively recycled using appropriate channels such as the PVC window industry.

Can I buy recycled plastic angle trim?

The simple answer is yes, just not from our stock range. As plastic manufacturers we generate waste during our extrusion process that we regrind onsite and re-use in scenarios where aesthetics are less important over form and function.

We have many customers who look to use regrind compound due to its more environmentally friendly approach to manufacturing and we’re delighted to be able to close loop our manufacturing waste in offering out regrind PVC angles a cheaper price than virgin PVC compound.

Plastic pallet protector strips are one such example where recycled plastic angles are a perfect outlet for our recycled compound. If you’re interested in using regrind material please call us on+44(0)1473 251051.

Can I buy plastic angle trim in bulk?

This website is set up to support volume orders and offer discounts accordingly for large volume plastic angle. We also offer a flat price delivery charge as opposed to many other manufacturers, often meaning we heavily subsidise carriage on large orders.

Do you offer discounts on large orders?

For most products, yes. These are detailed on each product page, and are accumulated in the basket.

We also offer volume pricing that starts at either 500 or 1000m+ MOQ, depending on profile size. We're happy to pass on the economies of scale we gain through extended manufacturing; taking up this options not only offers a price saving but also allows you to customise your order, specifying things such as varying cut lengths.

Please contact the Sales Team to discuss this requirement.

What delivery service do you use?

Unfortunately due to the length of our goods we're unable to make use of many of the small parcel couriers such as Evri, DPD and Yodel. As such, we use a commercial carrier, DX.

Whilst we do have tiered delivery pricing determined by postcodes where we're charged surcharges, our flat rate delivery charges represent additional discount for larger orders as our costs increase with the weight of the consignment.

Can the delivery driver phone ahead so I can make sure I'm there for my delivery?

Our carriers are unable to offer this service. However, if you have a safe place your goods can be left, you can inform us when you order and not necessarily have to wait in.

Will my delivery arrive at the weekend?

Unless you specify a Saturday delivery at checkout the standard service is working days, Monday to Friday, excluding Bank Holidays.

For example if we despatch on Friday on a Next Day Service, your items are due for delivery the following Monday.

Can we collect our order as we live locally?

Yes, this can be arranged at a mutually convenient time, even though we do not have a trade counter as such. However, because of the way this website is set up, you will need to pay for delivery when you order, and this element of your payment (+ Vat) will be refunded to your payment card on collection of your items.

Can I buy single lengths?

Unfortunately not, as the manufacturer we only deal in whole packs as we just don't have the physical space to store lengths without damaging them.

If you do need single lengths, please contact the office as we have a number of Resellers that should be able to fulfil your needs.

Can your Plastic trims be used outdoors?

All of our plastic trims, except Clear and Silver have UV stabilisers included within the PVC Compound allowing them to be used externally.

The main purpose of the UV stabilisers is to minimise colour fade and also maintain impact strength, preventing the profile becoming brittle. It's worth noting that darker colours absorb heat from the sun at a faster rate than lighter colours so over time they will experience a slight fading.

Please also be aware that in particularly hot conditions profiles may distort in shape when used externally. Based on our existing grade of PVC, UV Stabilisers will not prevent this happening and this problem is again exacerbated on the darker profiles such as Black and Anthracite Grey.